BROADCOM NetXtreme E-Series N210TP - Netzwerkadapter

Netzwerkadapter

PCI Express 3.0 x8

PCI 3.0

Gigabit Ethernet / 10Gb Ethernet x 2

Kabelgebunden

Ethernet 1000Base-T, Ethernet 10GBase-T

Gigabit Ethernet, 10 Gigabit Myrinet

10 Gbps

Link/Aktivität

Wake on LAN (WOL), Auto-Uplink (Auto MDI/MDI-X), Data Center Bridging Exchange (DCBX)-Unterstützung, PXE-Unterstützung, Large Send Offload (LSO), Large Receive Offload (LRO), Receive Side Scaling (RSS), UEFI-Support, Single Root I/O Virtualization (SR-IOV), Data Center Bridging (DCB), TCP Segmentation Offload (TSO), Extended Message-Signaled Interrupts (MSI-X), Generic Routing Encapsulation (GRE), Transmit Side Scaling (TSS), iSCSI-Boot, TCP-/IP-Prüfsummen-Offload, UDP-/IP-Prüfsummen-Offload, RDMA over Converged Ethernet (RoCE), Priority-Based Flow Control (PFC), Network Controller Sideband Interface (NC-SI), Virtual Extensible LAN (VXLAN), Network Virtualization using Generic Routing Encapsulation (NVGRE), Function Level Reset (FLR), Message Signaled Interrupts (MSI), Jumbo Frame-Unterstützung (bis zu 9000 Bytes), Mware NetQueue and Microsoft Virtual Machine Queue (VMQ), MCTP over SMBus, TruFlow, Interrupt Coalescing, Enhanced Transmission Selection (ETS), Quantized Congestion Notification (QCN), Open Compute Project (OCP) 3,0 Unterstützung, vSwitch Acceleration, Tunnel-Wware Stateless Offloads, SMBus 2.0, NetQueue

IEEE 802.3ab, IEEE 802.3an, OCP 3.0

Broadcom BCM57416

2 x 1/10GBase-T - RJ-45

EMC

14.6 Watt

110 g