The InLine® PoE+ Gigabit Network Switch is a fast and flexible solution for upgrading the existing network to the IEEE 802.3af / IEEE 802.3at Power over Ethernet system as well as a fiber-optic connection to bridge longer distances. The switch provides protection against, for example, overload, overvoltage and overheating at each port. In addition, the switch offers both IEEE 802.3af and IEEE 802.3at PoE+ with up to 32 watts of power per port via single Cat. 5/5e/6 Ethernet cable with a PoE budget of 380W and a combined total power of 420 watts. 24x 10/100/1000Mbps PoE+ ports solve the problem of a limited number of available power outlets, providing system administrators with a flexible solution to power almost anywhere the powering network device, such as PoE-enabled IP cameras or wireless access points.The LC display not only shows the operating state of the PoE port, but also the state of each port, such as e.g.: Output power, overload, short circuit, low workload, undervoltage, overvoltage, overheating, etc. These includes, for example:Switch mode (Normal, VLAN (the switch supports the isolation of each port, but each port can still communicate with the uplink port), CCTV (the switch supports a maximum distance of 250 meters with a transmission speed of 10Mbps.Switch bandwidthPD type (PD=powered devices): Enhance: PD supports no PoE according to IEEE802.3at/af, Standard: PD supports PoE according to IEEE802.3at/af, Legacy: Using a Cisco-PD with ist own PoE standardPD Reboot by deactivating/activating the corresponding portPSE power fine (PSE=power supply equipment): This feature can increase the overall performance of the PoE budgetPSE port priority: Here you can set the PoE prioritization per port between high, medium and lowPSE port enable: Through this every individual port can be activated / deactivatedPSE port power: With this function, the PoE power can be selected in steps of 2W between 8W-32WFan control: This function gives you the option of specifying fan operation. You can choose from "Always On", "20% PB" (when the switch spends 20% of its power budget), and "40% PB".Specifications Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T,IEEE 802.3z 1000BASE-X Gbit/s Ethernet over Fiber-Optic, IEEE 802.3x Full Duplex and flow control, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet PlusPorts: 24x 10/100/1000Base-T RJ45, Auto-MDI/MDI-X, 2x 1000Mb/s SFPPoE ports: 1-24PoE budget: 380WTotal output: 420WLCD display: Real-time display of PoE operating statusPoE output power: Max. 32 watts per portLED indicators: PWR, LNK/ACT PoENetwork cable: 10BASE-T: UTP Category 3, 4, 5 cable (100m)100BASE-TX: UTP Category 5, 5e cable 100m)1000BASE-T: UTP Category 5, 5e cable (100m)1000BASE-SX: MMF, SMFMAC address table: 8K, automatic learning, automatic updatesJumbo Frame: 9216 BytesPacket buffer: 4.1MbitTransmission method: Store-and-forwardPacket forwarding rate: 38.69MppsBandwidth: 52GNumber of fans: 3Dimensions (W x D x H): 440x232x45mmWeight: appr. 3.7kgMains input: 100~240V AC, 50/60HzEnvironmental conditions: Operating temperature -10-60°C, storage temperature -40-70°C, humidity in operation 10-90% non condensing, humidity during storage 5-90% non condensingSurge protection: ± 6KVContent of delivery:1x InLine® PoE+ Gigabit Network Switch1x user manual (German/English)1x power cable2x 19" mounting brackets8x screws for the mounting brackets4x rubber feet
Ports & interfaces | |
Basic switching RJ-45 Ethernet ports quantity: | 24 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
SFP module slots quantity: | 2 |
Fiber optic connector: | SFP |
Network | |
Networking standards: | IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
10G support: | ![]() |
Copper ethernet cabling technology: | 10BASE-T, 100BASE-TX, 1000BASE-T |
Cable types supported: | Cat3, Cat4, Cat5, Cat5e |
Full duplex: | ![]() |
Flow control support: | ![]() |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
MAC address auto-learning supported: | ![]() |
VLAN support: | ![]() |
Optical fiber | |
Fiber ethernet cabling technology: | 1000BASE-SX |
Data transmission | |
MAC address table: | 8000 entries |
Switching capacity: | 52 Gbit/s |
Forwarding rate: | 38.69 Mpps |
Store-and-forward: | ![]() |
Jumbo frames support: | ![]() |
Jumbo frames: | 9216 |
Packet buffer memory: | 4.1 MB |
Design | |
Rack mounting: | ![]() |
Form factor: | 1U |
Product colour: | Black |
Housing material: | Metal |
LED indicators: | Activity, Link, PoE, Power |
Number of fans: | 3 fan(s) |
Performance | |
Maximum data transfer rate: | 1000 Mbit/s |
Power | |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE): | ![]() |
Power over Ethernet (PoE) ports quantity: | 24 |
Power over Ethernet (PoE) power per port: | 32 W |
Total Power over Ethernet (PoE) budget: | 380 W |
Operational conditions | |
Operating temperature (T-T): | -10 - 60 °C |
Storage temperature (T-T): | -40 - 70 °C |
Operating relative humidity (H-H): | 10 - 90% |
Storage relative humidity (H-H): | 5 - 90% |
Weight & dimensions | |
Width: | 440 mm |
Depth: | 232 mm |
Height: | 45 mm |
Weight: | 3.7 kg |
Packaging data | |
Cables included: | AC |
Manual: | ![]() |
Other features | |
Ethernet interface type: | Fast Ethernet, Gigabit Ethernet |
Ethernet LAN (RJ-45) ports: | 24 |