Key function: VLAN & CCTV- 16*10/100/1000Mbps PoE RJ45 connections- 2*10/100/1000Mbps combo connections- 2*1000Mbps RJ45 connections- Corresponds to IEEE802.3af/at Power over Ethernet- Supports PoE power up to 32W for each PoE port- Automatic detection of power supply device- Remote supply of power and data up to 100 m- Flow control for full duplex operation and back pressure for half duplex operation- Supports VLAN and CCTV function- 8K MAC address, automatic address learning and address aging- Supports energy-efficient Ethernet (EEE) function EEE802.3az- Supports the PD alive function, i.e. the switch port is automatically reconnected after an interruption The DIN DN-95358 PoE Switch is a 16-port 10/100/1000Mbps PoE + 2G Gigabit RJ45 +2 Gigabit SFP PoE switch. The PoE ports can automatically detect IEEE 802.3af/at-compliant Powered Devices (PDs) and supply them with power. Your network is able to extend power and data transmission via a single cable to locations where there are no power lines or outlets that you could use to install devices such as APs, IP cameras or IP phones and the like.The PoE switch offers a simple, cost-effective and non-blocking wire-speed performance with 11-inch metal form for rack installation in office or department networks.
Management features | |
Switch type: | Unmanaged |
Ports & interfaces | |
Basic switching RJ-45 Ethernet ports quantity: | 16 |
Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
Fast Ethernet (copper) ports quantity: | 16 |
Gigabit Ethernet (copper) ports quantity: | 2 |
Combo SFP ports quantity: | 2 |
Power connector: | AC-in jack |
Network | |
Networking standards: | IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
10G support: | ![]() |
Full duplex: | ![]() |
Half duplex: | ![]() |
Flow control support: | ![]() |
Ethernet LAN data rates: | 10,100,1000 Mbit/s |
MAC address auto-learning supported: | ![]() |
VLAN support: | ![]() |
Data transmission | |
MAC address table: | 8000 entries |
Switching capacity: | 40 Gbit/s |
Forwarding rate: | 29.76 Mpps |
Store-and-forward: | ![]() |
Packet buffer memory: | 4 MB |
Design | |
Rack mounting: | ![]() |
Stackable: | ![]() |
Form factor: | 1U |
Product colour: | Black |
Housing material: | Metal |
LED indicators: | ![]() |
Number of fans: | 1 fan(s) |
Vandal-proof: | ![]() |
Suitable for outdoor use: | ![]() |
Country of origin: | China |
Power | |
Power source: | AC |
Power supply included: | ![]() |
AC input voltage: | 100 - 240 V |
AC input frequency: | 50 - 60 Hz |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE): | ![]() |
Power over Ethernet (PoE) power per port: | 32 W |
Total Power over Ethernet (PoE) budget: | 185 W |
Weight & dimensions | |
Width: | 180 mm |
Depth: | 280 mm |
Height: | 44 mm |
Weight: | 4.2 kg |
Packaging data | |
Cables included: | AC, LAN (RJ-45) |
Quick start guide: | ![]() |
Package width: | 370 mm |
Package depth: | 230 mm |
Package height: | 80 mm |
Package volume: | 6808 cm³ |
Package weight: | 2.58 kg |
Other features | |
Power supply: | 200 W |
Logistics data | |
UK Trade Tariff code: | 85176200 |