APC SRTG20KXLI uninterruptible power supply (UPS) Double-conversion (Online) 20 kVA 20000 W

ServiceabilityAudible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Disconnected battery notificationWarns when a battery is not available to provide backup power.Predictive failure notification.Provides early-warning fault analysis ensuring proactive component replacement.ManageabilitySerial connectivityProvides management of the UPS via a serial port.SmartSlotCustomize UPS capabilities with management cards.InfraStruXure Manager CompatibleEnables centralized management via the APC InfraStruXure Manager.LED status indicatorsQuickly understand unit and power status with visual indicators.Network manageableMost models provide remote power management options of the UPS over the network. Many do not have NMC embedded.Marketing featuresPeace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry s most rigorous standards.Save time with easy and convenient remote/network accessibility.Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.Avoids costly power problems by keeping your IT equipment and data protected and available.Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.Low operating and maintenance costs with proven reliability and intelligent battery management.Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.AdaptabilityFlash upgradeable firmwareInstall maintenance releases of firmware remotely using FTP.Plug-and-Play external batteriesEnsures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.ProtectionCold-start capableProvides temporary battery power when the utility power is out.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Input Power Factor CorrectionMinimizes installation costs by enabling the use of smaller generators and cabling.Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.Frequency and voltage regulationGives higher application availability by correcting poor frequency and voltage conditions without using the battery.Generator compatibleEnsures clean, uninterrupted power to protected equipment when generator power is used.AvailabilityScalable runtimeAllows additional run time to be quickly added as needed.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Automatic internal bypassSupplies utility power to the connected loads in the event of a UPS power overload or fault.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.

Features
UPS topology:	Double-conversion (Online)
Output power capacity:	20 kVA
Output power:	20000 W
Waveform:	Sine
Input operation voltage (min):	160 V
Input operation voltage (max):	415 V
Input frequency:	40/70 Hz
Output operation voltage (max):	230 V
Output frequency:	50/60 Hz
Output frequency regulation:	0.1 Hz
Maximum current:	87 A
Number of output phases:	3
Efficiency:	93%
Crest factor:	3:1
Emergency Power Off (EPO):
Input current Total Harmonic Distortion (THD):	5%
Noise level:	58 dB
Surge protection:
Audible alarm(s):
Audible alarm modes:	Alarm when on battery, Low battery alarm, Overload alarm
Auto-restart:
Ports & interfaces
USB port:
Serial interface:
Serial interface type:	RS-232
SmartSlot:
Battery
Battery technology:	Sealed Lead Acid (VRLA)
Battery voltage:	192 V
Battery life (max):	5 year(s)
Battery recharge time:	4 h
Cold start:
Design
Form factor:	Rackmount/Tower
Product colour:	Black
Display type:	LCD
LED indicators:
International Protection (IP) code:	IP20
Operational conditions
Operating temperature (T-T):	0 - 40 °C
Storage temperature (T-T):	-15 - 45 °C
Operating relative humidity (H-H):	0 - 95%
Storage relative humidity (H-H):	0 - 95%
Operating altitude:	0 - 2011.68 m
Non-operating altitude:	0 - 15240 m
Weight & dimensions
Width:	440 mm
Depth:	700 mm
Height:	306 mm
Weight:	142.5 kg
Package width:	590 mm
Package depth:	790 mm
Package height:	535 mm
Packaging data
Cables included:	RS-232
Logistics data
Harmonized System (HS) code:	85078000