To discharge leakage current / residual voltage. Reduces the afterglow of certain LED lamps when switched off. For use with frogblue dimmers.The frogConnect1-1 is used to discharge leakage current/residual voltage and thereby reduces the continued glow of certain LED lamps when switched off. This frog was developed for use with frogblue dimmers.Intended useFor assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth. A socket depth of 63 mm is recommended.System informationThis device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.Safety informationElectrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. When using the load outputs simultaneously, the total load of 1200W must not be exceeded. Country-specific regulations must always be observed.
| Features | |
| Connectivity technology: | Wired |
| Product colour: | Green |
| Dimmer: |  |
| Power | |
| Power source: | AC |
| AC input voltage: | 110-240 V |
| AC input frequency: | 50 - 60 Hz |
| Input current: | 6 A |
| Operational conditions | |
| Operating temperature (T-T): | -25 - 55 °C |
| Weight & dimensions | |
| Width: | 53 mm |
| Depth: | 75 mm |
| Height: | 21 mm |
| Weight: | 20 g |
