Telegärtner J00060A0071 patch panel accessory

The VM 8-8 modules are employed as connections and extensions of commercially available, shielded and unshielded twisted-pair installation cables (Cat.5e/ Cat.6/Cat.6A/Cat.7/Cat.7A) in the following applications: transition point/consolidation point, cable extensions, damaged cables, cable rerouting.When VM 8-8 modules are used, the cable segments in a structured wiring system do not need to be laid out again. This reduces the expenses for alterations and the overall costs to a minimum. Depending on the connection module type, up to 12 incoming and 12 outgoing 8-wire cables can be permanently connected together without any significant reduction in the transmission characteristics or limitation of the maximum link lengths.Performance Characteristics- connection via LSA Plus terminals on a common PCB- colour coding acc. to EIA/TIA 568A and B- connection of 4-pair shielded/unshielded installation and patch cords from AWG 27-22- pairs can be brought directly up to the terminal without untwisting the pairs- secure shielded contact using screw-on terminals directly on the PCB- variable cable feeds- cable strain relief using commercially available cable ties (VM 8-8 Cat.7A)- tool-free installation of shielding cover made of stainless steel (19" and wall mount version)- surface mount (AP) type: incoming and outgoing cables in the same direction- surface mount, 19", and basic (for loose connection) version: incoming and outgoing cables offset by 180 degrees- bonding connection option directly on the PCB (M4 screw)- EMC compatible in accordance with DIN EN 61000-6-1 and 61000-6-2- wall housing made of sheet steel,powder-coated, RAL7035 light grey- a maximum of 6 incoming and 6 outgoing cables- variable cable infeed from above and below / left and right / from the same direction