QNAP QSW-M2106R-2S2T network switch Managed L2 10G Ethernet (100/1000/10000) 1U Black

The QSW-M2106R-2S2T is a Layer 2 Web Managed Switch with two 10GbE SFP+ fiber ports, two 10GbE RJ45 ports and six 2.5GbE RJ45 ports. Supporting Layer 2 switching and network management via a user-friendly web user interface, the QSW-M2106R-2S2T offers flexible deployment in hybrid high-speed network environments and provides an entry-level network management solution. With a half-width design, two QSW-M2106R-2S2T can be installed in a 1U rack space for space-saving.10GbE connectivityIncludes two 10GbE SFP+ fiber ports (Backward compatible with 1G SFP) and two 10GbE RJ45 ports, compatible with NBASE-T technologies to support five speeds (10G / 5G / 2.5G / 1G / 100M) for high-speed networks.2.5GbE connectivitySix 2.5GbE RJ45 ports allow you to immediately multiply your network speed by 2.5 times while using existing Cat 5e cables.User-friendly management interfaceThe QNAP Switch System (QSS) is easy to use and provides an overview dashboard, port management and setting guide, making central network management intuitive.Layer 2 networkProvides Layer 2 management features (such as LACP, VLAN, ACL and LLDP) for IT staff to efficiently control network bandwidth and enhance security.RSTPOne of the few web-managed switches that supports Rapid Spanning Tree Protocol (RSTP). Easily and efficiently deploy small/medium-scale networks that support expansion, redundancy, and loop prevention.Online firmware updateQSS can be updated with just one click, helping IT staff ensure their network security.Half-width design, two models in 1UWith a half-width rackmount design, a QSW-M2106R-2S2T can be installed in a 1U rack space with another half-width rackmount switch (such as QSW-M2108R-2C) for efficient physical space utilization and tidy cabling.Flexible deployment with multiple 10G SFP+ fiber and Gigabit portsThe QSW-M2106R-2S2T provides two 10GbE SFP+ ports, two 10GbE RJ45 ports and six 2.5 Gigabit ports for connecting various devices and enabling hybrid high-speed networks. With SFP+ interfaces, Direct Attach Copper (DAC) cables can be used for connecting directly to SFP+ devices. You can also use RJ45 ports to connect 10GBASE-T/NBASE-T devices through RJ45 Category 6a (or better) cabling. The switching capacity of the QSW-M2106R-2S2T is 110Gbps, guaranteeing the full potential of each port.

Management features
Switch type:	Managed
Switch layer:	L2
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity:	2
Basic switching RJ-45 Ethernet ports type:	10G Ethernet (100/1000/10000)
Installed SFP+ modules quantity:	2
2.5G Ethernet (copper) ports quantity:	6
Console port:	RJ-45
Network
Networking standards:	IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Data transmission
MAC address table:	16000 entries
Switching capacity:	110 Gbit/s
Throughput:	55 Gbit/s
Design
Rack mounting:
Stackable:
Form factor:	1U
Product colour:	Black
Reset button:
LED indicators:	Activity, Link, Power, Speed, Status
Number of fans:	2 fan(s)
Electromagnetic compatibility:	CLASS B
Power
Power source:	AC
Power supply included:
AC input voltage:	100 - 240 V
AC input frequency:	50 - 60 Hz
Power consumption (typical):	40 W
Power over Ethernet (PoE)
Power over Ethernet (PoE):
Operational conditions
Operating temperature (T-T):	0 - 40 °C
Operating relative humidity (H-H):	5 - 95%
Weight & dimensions
Width:	207 mm
Depth:	248.8 mm
Height:	43.3 mm
Weight:	1.53 kg
Packaging data
Package weight:	2.3 kg
Sustainability
Sustainability compliance:
Sustainability certificates:	CE, Federal Communications Commission (FCC)