NETGEAR M4300-8X8F Managed L3 10G Ethernet (100/1000/10000) 1U Black

The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies. Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing as standard. Perfect for wireless access, unified communications and IP video, the NETGEAR M4300 Switch Series is also ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.

Best-in-class stacking

- M4300 is flexible enough for mixed stacking between 10 Gigabit and 1 Gigabit models, using any 10G port with any media type (RJ45, SFP+, DAC cables)
- High-availability is another key differentiator for stackable solutions: in case of a master switch failure, NSF and hitless failover ensure the standby switch takes over while forwarding plane continues to forward traffic on the operational stack members without any service interruption

Higher flexibility

- Two half-width M4300 switches can be paired in a single rack space for redundant Top of Rack installations with Auto-iSCSI prioritization
- 10 Gigabit ports are all independent and 1G backward compatible for progressive transition to 10G speeds

Lower complexity

- Entire feature set including L2 switching (multi-tiered access control) and L3 routing (static, RIP, OSPF, VRRP, PIM, PBR) is available without license
- DHCP/BootP innovative auto-installation including firmware and configuration file upload automation

Investment protection

- Line-rate spine and leaf stacking topologies offer multiple possibilities in server rooms, in branch collapsed cores or at the edge of growing networks
- Even if an organization is not ready for SDN, OpenFlow support offers future-ready design for maximum investment protection

Secure services

- With successive tiering, the Authentication Manager allows for authentication methods per port for a tiered authentication based on configured time-outs
- With BYOD, tiered Dot1x -> MAB -> Captive Portal authentication is powerful and simple to implement with strict policies

Industry standard management

- Industry standard command line interface (CLI), functional NETGEAR web interface (GUI), SNMP, sFlow and RSPAN
- Single-pane-of-glass NMS300 management platform with centralized firmware updates and mass-configuration support

Industry leading warranty

- NETGEAR M4300 series is covered under NETGEAR ProSafe Lifetime Hardware Warranty
- 90 days of Technical Support via phone and email, Lifetime Technical Support through online chat and Lifetime Next Business Day hardware replacement

Management features
Switch type:	Managed
Switch layer:	L3
Quality of Service (QoS) support:	Yes
Web-based management:	Yes
ARP inspection:	Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity:	8
Basic switching RJ-45 Ethernet ports type:	10G Ethernet (100/1000/10000)
Installed SFP modules quantity:	0
SFP+ module slots quantity:	8
Fiber optic connector:	SFP+
Console port:	RJ-45/Mini-USB
USB 2.0 ports quantity:	1
Network
Networking standards:	IEEE 802.11ad, IEEE 802.11az, IEEE 802.3ad, IEEE 802.3az
10G support:	Yes
Cable types supported:	Cat5, Cat5e, Cat6, Cat7
Port mirroring:	Yes
IP routing:	Yes
Flow control support:	Yes
Link aggregation:	Yes
Rate limiting:	Yes
Auto MDI/MDI-X:	Yes
Spanning tree protocol:	Yes
Auto-sensing:	Yes
Auto-negotiation:	Yes
VLAN support:	Yes
Virtual LAN features:	Private VLAN
Optical fiber
Fiber ethernet cabling technology:	10GBASE-LR, 10GBASE-LRM, 10GBASE-SR
Data transmission
MAC address table:	16000 entries
Switching capacity:	320 Gbit/s
Forwarding rate:	357 Mpps
Store-and-forward:	Yes
Number of static routes:	64
Jumbo frames support:	Yes
Jumbo frames:	9000
Security
DHCP features:	DHCP server, DHCP client
Access Control List (ACL):	Yes
Security algorithms:	HTTPS, SNMP, SSH
SSH/SSL support:	Yes
BPDU filtering/protection:	Yes
Multicast features
Multicast support:	Yes
Number of multicast groups filtered:	4000
Design
Rack mounting:	Yes
Stackable:	Yes
Form factor:	1U
Product colour:	Black
LED indicators:	Activity, Power, Speed
Safety:	CSA 22.2 #950, UL 1950)/cUL IEC 950/EN 60950
Electromagnetic compatibility:	CE, FCC 15 A, VCCI A, A EN 55022, (CISPR 22) A, EN 50082-1, EN 55024
Performance
Built-in processor:	Yes
Processor frequency:	800 MHz
Internal memory:	1024 MB
Flash memory:	256 MB
Noise level:	36.9 dB
Mean time between failures (MTBF):	196120 h
Power
Power supply included:	Yes
Number of power supply units:	1
AC input voltage:	120 - 230 V
Power consumption (max):	49 W
Power over Ethernet (PoE)
Power over Ethernet (PoE):	No
Operational conditions
Operating temperature (T-T):	0 - 50 °C
Storage temperature (T-T):	-20 - 70 °C
Operating relative humidity (H-H):	0 - 90%
Storage relative humidity (H-H):	0 - 95%
Operating altitude:	0 - 3000 m
Non-operating altitude:	0 - 3000 m
Heat dissipation:	18577 BTU/h
Weight & dimensions
Width:	212 mm
Depth:	345 mm
Height:	44 mm
Weight:	3.32 kg
Packaging content
Cables included:	AC, LAN (RJ-45), Mini-USB
User guide:	Yes
Rack mount kit:	Yes
Packaging data
Rubber feet:	Yes
Resource CD:	Yes
Logistics data
Harmonized System (HS) code:	85176990

Product Safety Information
Responsible Person in the EU:
NETGEAR International Limited Curraheen Road, University Technology Centre First Floor Building 3 T12K516 Cork Ireland vertrieb@netgear.com