The NETGEAR Easy-Mount Switch Family OverviewThe NETGEAR Easy-Mount Switch allows you to put more PoE/PoE+ ports Virtually Anywhere with its unique mounting system.The Easy-Mount Switch family comes with a full set of software features such as traffic prioritization, VLANs, QoS and PoE power allocation.Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for maximum power savings.Easy-Mount and Low Noise OperationDeploy your PoE/PoE+ switch closest to your PoE/PoE+ devices and put your PoE/PoE+ ports exactly where you need them.Install your ports up in the ceiling, strapped to a pole, mounted under a desk or tabletop. If you wish you also can rack mount the GS408EPP switch on a 19-inch standard rack. You can even rack mount 2 GS408EPP switches back to back in a single 1U.Thanks to the active fans the GS408EPP is a silent switch, well below offices ambient background noise.PoE/PoE+ SupportPower-Over-Ethernet (PoE) option available for powering IP Security Cameras, VOIP phones, wireless access points, and other PD-powered devices.With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices.Easy-Mount "Virtually Anywhere" Mounting SystemThe innovative mounting system gives you the flexibility to place the Easy-Mount Switch in locations where other switches will not go. Whether it's directly on a wall, strapped to a pole, under the meeting table in a conference room or in a server closet, vertical or horizontal, flat or perpendicular, the unique mounting system allow you to control exactly how and where your ports and cables are deployed.Networking Management FeaturesThe Easy-Mount Switches can go beyond plug-and-play connectivity with additional Switch networking features, allowing businesses to segment the network with VLANs or prioritize voice and video traffic with QoS. IGMP Snooping allows for optimized multimedia delivery and port trunking adds redundancy to uplinks and servers. Setup and configuration is simple using the web browser-based configuration GUI.NETGEAR WarrantyEasy-Mount switches are backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty.Lifetime Next Business Day Hardware Replacement.ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days.ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.
| Management features | |
| Switch type: | Managed |
| Switch layer: | L2 |
| Quality of Service (QoS) support: |  |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity: | 8 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| Network | |
| Networking standards: | IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x |
| 10G support: |  |
| Port mirroring: | |
| Full duplex: | |
| Flow control support: | |
| Link aggregation: | |
| Rate limiting: | |
| VLAN support: | |
| Virtual LAN features: | Voice VLAN, Tagged VLAN, Port-based VLAN |
| Number of VLANs: | 64 |
| Data transmission | |
| MAC address table: | 4000 entries |
| Switching capacity: | 16 Gbit/s |
| Forwarding rate: | 11.9 Mpps |
| Store-and-forward: | |
| Latency (10-100 Mbps): | 9.1 µs |
| Latency (1 Gbps): | 2.7 µs |
| Number of queues: | 4 |
| Jumbo frames support: | |
| Jumbo frames: | 9000 |
| Security | |
| DHCP features: | DHCP client |
| IGMP snooping: | |
| Password protection: | |
| DoS attack prevention: | |
| Queue scheduling algorithms: | Weighted Round Robin (WRR) |
| Multicast features | |
| Multicast support: | |
| Number of multicast groups filtered: | 128 |
| Design | |
| Rack mounting: | |
| Product colour: | Black, Grey |
| LED indicators: | Activity, Link, PoE, Power, Speed, Status |
| Number of fans: | 1 fan(s) |
| Safety: | CB; IEC 60950-1:2005(ed.2) + A1:2009 + A2:2013; UL/cUL Listed (UL 60950-1)/CAN/CSA C22.2 No. 60960-1-07; EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013; AN/NZS 60950.1:2015; EAC |
| Electromagnetic compatibility: | CE; 47 CFR FCC 15, B, A; ICES-003:2016 6, A; ANSI C63.4:2014; EN 55022:2010 + AC:2011, A EN 55024:2010; EN 61000-3-2:2014, A; EN 6100-3-3:2013; CISPR 22:2008, A; AS/NZS CISPR 22:2009 + A1:2010, A; VCCI V-3/2015.04, A; V-4/2012.4; EAC; KC; CNS 13438 |
| Performance | |
| Noise level: | 26.9 dB |
| Firmware upgradeable: | |
| Buffer size: | 192 KB |
| Mean time between failures (MTBF): | 2715369 h |
| Power | |
| AC input voltage: | 100 - 240 V |
| AC input frequency: | 50 - 60 Hz |
| Input current: | 2 A |
| Power consumption (max): | 148 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE): | |
| Power over Ethernet plus (PoE+) ports quantity: | 8 |
| Total Power over Ethernet (PoE) budget: | 124 W |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 50 °C |
| Storage temperature (T-T): | -20 - 70 °C |
| Operating relative humidity (H-H): | 0 - 90% |
| Storage relative humidity (H-H): | 0 - 95% |
| Operating altitude: | 0 - 3000 m |
| Non-operating altitude: | 0 - 3000 m |
| Heat dissipation: | 505.27 BTU/h |
| Weight & dimensions | |
| Width: | 380 mm |
| Depth: | 100 mm |
| Height: | 43.2 mm |
| Weight: | 1.6 kg |
| Packaging data | |
| Quick start guide: | |
| Mounting brackets included: | |
| Rack mount kit: | |
