- Details
New ATX PSU Specifications
Updated ATX 3.0 specifications for the next-generation hardware power demands and ensure users get the most stable and cost-optimized performance possible with the highest power efficiency.
Ultra Power Density
Compared to general high-efficiency & high wattage PSU 170mm length, Hydro Ti PRO series delivers high power with shorter size of 150mm.
80 Plus® Titanium Certification
Hydro Ti PRO series is a power supply with 80 PLUS® Titanium provides over 94% efficiency at the load of 50 % and Cybenetics-certified for lower power consumption.
Lambda A++ Certification
Hydro Ti PRO ATX3.0(PCIe5.0) 1000W got Lambda A++ noise rating. By averaging the noise measurements that take from Cybenetics test results.
Smarter, Quieter and Longer Lasting Eco Friendly Fan
Under 50% loading, you will enjoy Zero RPM experience when eco semi-fanless fan control switch is on, , and get the benefit of long lifespan from a 135mm fluid dynamic bearing fan.
Off-Wet, Off-Dust and Off-Stain Coating
Covered with exclusive conformal coating which guarantees to offer better and reliable performance in harsh environments and is tested to work in environments up to 95% relative humidity.
LLC Topology
Zero voltage switching of the main switches thereby dramatically lowering switching losses and boosting efficiency.
450V, 105°C Japanese E-Capacitors
Hydro Ti PRO series uses Japanese bulk capacitors to ensure a longer lifetime and protect your equipment from the infamous capacitor leakage problem.
Unleash +12V Power Output
VGA card is a power-hungry component that needs most power. A single +12V rail design can deliver stable power and avoid any overloading conditions.
Fully Modular Design
Fully-modular design not just for easier installation, but also provides your system a neat and tidy look.
Stylish & Changeable Side Sticker
Includes unique side stickers for DIY enthusiasts and gamers.
| Power | |
| Total power: | 1000 W |
| AC input voltage: | 100 - 240 V |
| AC input frequency: | 50/60 Hz |
| Input current: | 13-6 A |
| Combined power (+3.3V): | 120 W |
| Combined power (+12V): | 1000 W |
| Combined power (+5V): | 120 W |
| Combined power (-12V): | 18.6 W |
| Combined power (+5Vsb): | 18.6 W |
| Max output current (+3.3V): | 20 A |
| Max output current (+12V): | 83.33 A |
| Max output current (+5V): | 20 A |
| Max output current (-12V): | 0.3 A |
| Max output current (+5Vsb): | 3 A |
| Efficiency: | 94% |
| Power protection features: | Over current, Over power, Over voltage, Overheating, Short circuit |
| Ports & interfaces | |
| Motherboard power connector: | 20+4 pin ATX |
| Peripheral (Molex) power connectors (4-pin): | 4 |
| Motherboard power cable length: | 60 cm |
| Number of SATA power connectors: | 12 |
| PCI Express power connectors (6+2 pin): | 5 |
| PCI Express power connectors (12+4 pin) cable length: | 700 mm |
| CPU power connector (4+4 pin): | Yes |
| CPU power cable length: | 70 cm |
| Cabling type: | Fully-Modular |
| Performance | |
| Purpose: | PC |
| Power supply unit (PSU) form factor: | ATX |
| 80 PLUS certification: | 80 PLUS Titanium |
| ATX version: | 3.0 |
| EPS version: | 2.92 |
| Noise level: | 15 dB |
| Bearing technology: | FDB |
| Design | |
| Product colour: | Black |
| Cooling type: | Active |
| Fan diameter: | 13.5 cm |
| Number of fans: | 1 fan(s) |
| Fan location: | Top |
| On/off switch: | Yes |
| Packaging content | |
| Cables included: | CPU, PCIe, Peripheral (Molex), SATA |
| Weight & dimensions | |
| Width: | 150 mm |
| Depth: | 150 mm |
| Height: | 86 mm |
Product Safety Information
Responsible Person in the EU:
Fortron Source (Europa) GmbH Carl-Friedrich-Benz-Strasse 13 47877 Willich Deutschland info@fortron-source.de
OCTO24.com © 2026 | Template © 2009-2026 by modified eCommerce Shopsoftware