Finisar s FTLX8574D3BCL 10Gb/s SFP+ transceivers are designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431 1 , SFF-8432 2 , IEEE 802.3-2012 10GBASE-SR/SW 3 and 10G Fibre Channel 1200-Mx-SN-I 4. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472 5 . The FTLX8574D3BCL is a limiting module , i.e., it employs a limiting receiver.Host board designers using an EDC PHY IC should follow the IC manufacturer s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS Directive 2011/65/EU 6 .
| Performance | |
| SFP transceiver type: | Fiber optic |
| Maximum data transfer rate: | 10500 Mbit/s |
| Interface type: | SFP+ |
| Multi-mode fiber (MMF) supported: |  |
| Fiber optic connector: | LC |
| SFP transceiver standard: | SR, SW, SX |
| Wavelength: | 850 nm |
| Duplex system: | Full, Half |
| Fiber ports quantity: | 1 |
| Features | |
| Product colour: | Grey |
| Hot-Plug support: | |
| Certification: | EN (IEC) 60950 |
| Power | |
| Input voltage: | 3.3 V |
| Maximum voltage: | 3.46 V |
| Maximum current: | 0.25 A |
| Operational conditions | |
| Operating temperature (T-T): | -5 - 70 °C |
| Storage temperature (T-T): | -40 - 85 °C |
| Operating relative humidity (H-H): | 0 - 85% |
| Weight & dimensions | |
| Width: | 14.8 mm |
| Depth: | 56.5 mm |
| Height: | 11.8 mm |
| Packaging data | |
| Number of products included: | 1 pc(s) |
| Technical details | |
| Sustainability certificates: | RoHS |
