ONVIF Compliant | For Quick Install of Security DevicesWith ONVIF standards, the GS-5210PL provides system integrators easy setup, quick discovery, configuration, and control of ONVIF conformant products on the network. Just plug and play.Beyond Security | All Fit Together The EDIMAX ONVIF switches series greatly enhances IP surveillance network systems; it supports the ONVIF standard, which is compatible with working ONVIF compliant Profiles G/S/A/C/T/M devices to provide fast and easy system settings, device discovery, and user authentication.Let Safety be KnownThe built-in power backfeed protection/ PoE detection function keeps the PoE network safe and efficient.Strong Ability to Proceed DataWith 24Gbps backplane bandwidth and a forwarding rate of 17.8Mpps, the GS-5210PL provides maximum available bandwidth without delay.Robust Failover Mechanisms The GS-5210PL has two firmware stored for backup. It can activate the backup firmware right away while the current one faces problems.Guaranteed 200 Meters | Going the DistanceWhile general Ethernet switches have a distance restriction of 100 meters, the GS-5210PL long-range mode provides extended power and data delivery distance to 200 meters (656 ft.) at 10Mbps full-duplex operation on a per-port basis. It's ideal for long-distance applications such as IP cameras, VoIP phones, access points, and PoE-enabled IoT devices at remote locations.4-digit LED Display | Knowing Instant Power DataIn addition to a web-based GUI to keep track of port power, the GS-5210PL features an intuitive 4-digit LED display showing its power consumption. System integrators can check the total power budget, power consumption per port, and available power left. All with a single hardware select button.Safe Power Backfeed ProtectionEach port is equipped with power backfeed protection to avoid damaging the PoE ports while the non-standard PSE (Power Sourcing Equipments) are connected.
| Management features | |
| Switch type: | Managed |
| Quality of Service (QoS) support: | ![]() |
| Web-based management: | ![]() |
| System event log: | ![]() |
| Ports & interfaces | |
| Basic switching RJ-45 Ethernet ports quantity: | 10 |
| Basic switching RJ-45 Ethernet ports type: | Gigabit Ethernet (10/100/1000) |
| SFP module slots quantity: | 2 |
| Network | |
| Networking standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Copper ethernet cabling technology: | 10BASE-T, 100BASE-TX, 1000BASE-LX, 1000BASE-SX, 1000BASE-T |
| Port mirroring: | ![]() |
| IPv6 routes: | 8 |
| VLAN support: | ![]() |
| Virtual LAN features: | Interface-based VLAN, MAC address-based VLAN, Port-based VLAN, Tagged VLAN, VLAN Identifier ( VLAN ID), Voice VLAN |
| Optical fiber | |
| Switching optical modules type: | Gigabit Ethernet |
| Data transmission | |
| MAC address table: | 8000 entries |
| Switching capacity: | 24 Gbit/s |
| Jumbo frames support: | ![]() |
| Jumbo frames: | 9000 |
| Packet forwarding rate (1 Gbps): | 1488000 pps |
| Packet forwarding rate (100 Mbps): | 148800 pps |
| Packet forwarding rate (10 Mbps): | 14880 pps |
| Security | |
| DHCP features: | DHCP snooping |
| IGMP snooping: | ![]() |
| Static port security: | ![]() |
| Authentication type: | AAA, RADIUS |
| Design | |
| Product colour: | Black |
| LED indicators: | Link, PoE |
| Certification: | FCC Class A, CE, ONVIF Compliant |
| Power | |
| AC input voltage: | 120 - 240 V |
| AC input frequency: | 50 - 60 Hz |
| Power consumption (typical): | 110 W |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE): | ![]() |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 50 °C |
| Storage temperature (T-T): | -40 - 70 °C |
| Operating relative humidity (H-H): | 10 - 90% |
| Storage relative humidity (H-H): | 10 - 90% |
| Weight & dimensions | |
| Width: | 230 mm |
| Depth: | 330 mm |
| Height: | 44 mm |
| Weight: | 2.3 kg |
| Logistics data | |
| Harmonized System (HS) code: | 85176990 |