The Delta certified INFRALAN® installation cable MK7100.x-CPR is constructed for transmissions up to 1200 MHz and exceeds with the electrical transmission properties the requirements of the category 7A. Suitable for structured cabling of Class E, EA, F and FA according to ISO/IEC 11801 (AMD 2:2009) resp. EN 50173-1 (2009). The twisted pairs are protected against interferences with a shielding foil (PiMF) and a total shielding. This excellent protection also prevents the radiation of signals out of the cables. The shielding ensures the compliance of emitted interferences according to class B EN 55022 and the interference resistance according to EN 55024. The stranding of the twisted pairs is optimized so that the delay skew between the pairs at the greatest possible uncoupling (crosstalk) is minimun. With this cable transmission rates up to 10 GBit according to IEEE 802.3 are possible.
Features | |
Cable length: | 100 m |
Cable standard: | Cat7a |
Cable shielding: | S/FTP (S-STP) |
Connector 1: | ![]() |
Connector 2: | ![]() |
Product colour: | Orange |
Connector 1 gender: | ![]() |
Connector 2 gender: | ![]() |
Conductor material: | Copper |
Cable class: | D |
Cable fire class: | B2ca |
Ethernet interface type: | 10 Gigabit Ethernet |
AWG wire size: | 22/1 |
Data transfer rate: | 10000 Mbit/s |
Frequency: | 1200 MHz |
Bend radius (min): | 3.36 cm |
Fire-resistant: | ![]() |
Operational conditions | |
Operating temperature (T-T): | -20 - 60 °C |
Storage temperature (T-T): | 0 - 50 °C |
Weight & dimensions | |
Outer diameter: | 8.4 mm |
Packaging data | |
Quantity per pack: | 1 pc(s) |
Technical details | |
Doesn't contain: | Halogen |