Wi-Fi capacity requirements in office buildings, classrooms, and retail venues are rapidly raising due to increase in Wi-Fi connected devices, non-Wi-Fi IoT devices and bandwidth-hungry applications.
The R650 access point (AP) with the latest Wi-Fi 6 (802.11 ax) technology delivers increased capacity, improved coverage and performance in dense environments. The R650 is our mid-range dual-band, dual-concurrent AP that supports six spatial streams (4x4:4 in 5GHz, 2x2:2 in 2.4GHz). The R650 supports peak data rates of up to 2974 Mbps and efficiently manages up to 512 clients connections. Furthermore, 2.5GbE Ethernet ensures the backhaul will not be a bottleneck for full use of available Wi-Fi capacity.
The R650 has built-in IoT radios with onboard Bluetooth® Low Energy and Zigbee capabilities. In addition, the R650 is a converged access point that allows customers to seamlessly integrate any new wireless technologies with the pluggable IoT module.
| Features | |
| 2.4 GHz: | Yes |
| 5 GHz: | Yes |
| 6 GHz: | No |
| Maximum data transfer rate: | 2400 Mbit/s |
| Maximum data transfer rate (2.4 GHz): | 574 Mbit/s |
| Maximum data transfer rate (5 GHz): | 2400 Mbit/s |
| Ethernet LAN data rates: | 1000,2500 Mbit/s |
| Networking standards: | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3af, IEEE 802.3at |
| Number of users: | 512 user(s) |
| Bluetooth: | Yes |
| Bluetooth Low Energy (BLE): | Yes |
| Tunnel forwarding: | Yes |
| MIMO: | Yes |
| MIMO type: | Multi User MIMO |
| Spread spectrum method: | OFDMA |
| Fit AP mode features: | Hotspot 2.0 |
| Virtual LAN features: | Port-based VLAN |
| Security | |
| Security algorithms: | WPA-PSK, WPA-TKIP, WPA2-AES, WPA3 |
| Number of SSID supported: | 31 |
| Remote Authentication Dial-In User Service (RADIUS): | Yes |
| Protocols | |
| IPv4 & IPv6 features: | Dual stack IPv4/IPv6 |
| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports: | 2 |
| USB 2.0 ports quantity: | 1 |
| USB connector type: | USB Type-A |
| DC-in jack: | Yes |
| Power | |
| Power over Ethernet (PoE): | Yes |
| Power consumption (typical): | 21.59 W |
| Design | |
| Placement: | Ceiling, Wall |
| Product colour: | White |
| Reset button: | Yes |
| LED indicators: | Yes |
| Certification: | EN 60950-1 Safety · EN 60601-1-2 Medical · EN 61000-4-2/3/5 Immunity · EN 50121-1 Railway EMC · EN 50121-4 Railway Immunity · IEC 61373 Railway Shock & (bbr- on · UL 2043 Plenum · EN 62311 Human Safety/RF Exposure · WEEE & RoHS · ISTA 2A $r-nsror|- on |
| Antenna | |
| Antenna type: | Internal |
| Antenna gain level (max): | 3 dBi |
| Weight & dimensions | |
| Width: | 194 mm |
| Depth: | 224 mm |
| Height: | 47 mm |
| Weight: | 854 g |
| Operational conditions | |
| Operating relative humidity (H-H): | 0 - 95% |
| Operating temperature (T-T): | 0 - 50 °C |
