BlueOptics Media Converter: Converting a Copper Network into a Fiber NetworkThe BlueOptics BLMC011-009 10 Gigabit Media Converter is a high-performance, cost-effective solution offering two SFP+ Slots to covert electrical into optical signals. Supporting a data rate of up to 10Gbps Cat6A (or above) RJ45 patch cable respectively via glass fiber. The BlueOptics BLMC011-009 10 Gigabit Media Converter increases the functionality and extends the productive life of both your legacy cabling infrastructure and networking equipment when adding Fiber to your network.Various Possibilities for each DemandThe BlueOptics BLMC011-009 10 Gigabit Media Converter can be used in unmanaged network environments. The BlueOptics BLMC011-009 10 Gigabit Media Converter includes pluggable SFP+ transceiver modules as LC duplex and RJ45 variant. The BlueOptics BLMC011-009 10 Gigabit Media Converter uses Auto-Negotiation and automatically detects the copper port speed and performs a rate conversion if the fiber SFP+ transceiver speed is different. Also, it automatically detects which Fiber Optic SFP+ transceiver has been deployed and automatically adjusts.Various Possibilities for each DemandTo be able to interconnect with any network type the BlueOptics BLMC011-009 10 Gigabit Media Converter has different features to make your project possible. The BlueOptics BLMC011-009 10 Gigabit Media Converter offers features such as link pass-through (The copper Ethernet port reflects the status of the 10GBase-X media converter port), fiber fault alert (the status of the 10GBase-X receiver is transferred to the 10GBase-X transmitter. Thus, the partner device connected to the 10GBase-X interface of the media converter is notified of the fault), auto-MDIX (Automatic Medium-Dependent Interface Crossover - detects the signals on the copper Ethernet interface to determine which cable type is connected (straight-through or crossover) and automatically configures the connection) and a remote loopback function on the 10GBase-X-Fiber optic interface. Because of this the BlueOptics BLMC011-009 10 Gigabit Media Converter is the perfect solution for your network extension.Media Converter InstallationBefore installation attach an ESD-preventive wrist to ensure not to damage the BlueOptics BLMC011-009 10 Gigabit Media Converter or the optical transceivers that are used with it. For a detailed installation guide, please check the manual of the device to avoid any unwanted happenings that may cause any damage or misfunctioning.Industrial StandardsBlueOptics BLMC011-009 10 Gigabit Media Converters meet or exceed industrial standards, such as CE and RoHS as well as the regulations of the FCC. Through continuous monitoring before, during and after the production process, according to ISO9001, CBO reaches a steady quality of each BlueOptics Media Converter.Act now!By using BlueOptics high availability BLMC011-009 10 Gigabit Media Converters, networks can be prepared for increasing demands. Regardless whether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higher reliability is desired. With BlueOptics Media Converters you can improve your connections and reduce your CAPEX for pluggable optics up to 90%.
| Network | |
| Maximum data transfer rate: | 10000 Mbit/s |
| Ethernet LAN data rates: | 10,100,1000,10000 Mbit/s |
| Fiber ethernet cabling technology: | 10GBASE-ER |
| Ports & interfaces | |
| Fiber optic connector: | SFP+ |
| Connectivity technology: | Wired |
| Ethernet LAN (RJ-45) ports: | 1 |
| Fiber ports quantity: | 2 |
| Performance | |
| Maximum transfer distance: | 30 m |
| Wavelength: | 1550 nm |
| Design | |
| Internal: |  |
| Product colour: | Black |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 50 °C |
