High performance Single Tower with 160W TDPGerman engineering, an all-black heatsink combined with the new 92mm Wing Boost 3 fan: The Dolomit offers enough spare performance to efficiently cool the most demanding systems.High-end heat pipes & copper base plate4 high-end heat pipes with a large contact area on the nickel-plated Copper base plate ensure good heat pick-up at the CPU. Therefore the heat can be conducted to the large area fin stack quickly and efficiently.All-black designThe heat sink is completely black and the stylish top fin rounds the design off. Further are all mounting parts kept black too.Asymmetrical heat sinkThe asymmetrical design of the Dolomit heat sinks allows maximum freedom when choosing RAM modules. No matter how high the heat spreader of the module is, it will fit without any problems. 100% RAM compatibility on the sockets 1200, 115X und AM4.Wing Boost 3Uncompromising performance and quiet operation at the same time. The 92 mm Wing Boost 3 expands the multi award-winning Wing Boost 3 premium fan family. It delivers an extremely high static pressure.Upgradable fan configurationIf even more performance is required, the kit contains four fan clips. This allows the mounting of an additional 92mm fan on the back of the heat sink, increasing the cooling performance even further.Thermal greaseThe thermal grease has excellent thermal conductivity. Advantages: No hardening, silicone free and not electrically conductive.German EngineeringA perfect balancing act between performance and compatibility was achieved through intelligent material selection and a new Rock Mount 3 mounting system.CompatibilityThe enclosed mounting material allows secure installation on the following sockets:- Intel® LGA: 1200, 1150, 1151, 1155, 1156, 2066, 2011-v3, 2011- AMD: AM4
| Performance | |
| Suitable location: | Processor |
| Type: | Cooler |
| Fan diameter: | 9.2 cm |
| Supported processor sockets: | LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066 |
| Rotational speed (min): | 500 RPM |
| Rotational speed (max): | 2200 RPM |
| Noise level (high speed): | 23.8 dB |
| Airflow: | 65.4 m³/h |
| Maximum air pressure: | 1.92 mmH2O |
| Bearing type: | Hydraulic |
| Quantity per pack: | 1 pc(s) |
| Design | |
| Product colour: | Black |
| Base plate material: | Copper |
| Number of fans: | 1 fan(s) |
| Number of fan blades: | 11 |
| Fins material: | Aluminium |
| Fan connector: | 4-pin |
| Power | |
| Power consumption (typical): | 3 W |
| Voltage: | 7 - 13.2 V |
| Rated voltage: | 12 V |
| Rated current: | 0.25 A |
| Thermal Design Power (TDP): | 160 W |
| Weight & dimensions | |
| Width: | 95 mm |
| Depth: | 85 mm |
| Height: | 125 mm |
| Weight: | 588 g |
| Fan dimensions (W x D x H): | 92 x 92 x 25 mm |
