Axagon EE25-XA storage drive enclosure HDD/SSD enclosure Black 2.5"

The compact aluminium AXAGON EE25-XA ALINE external box with USB 2.0 interface intended for 2.5" SATA disks.

Lightweight yet durable cast aluminum case for perfect mechanical protection of the disk and excellent heat dissipation.

The decently shaped case with a brushed surface ensures an elegant look.

Reading of S.M.A.R.T. information monitoring the condition of the external disk.

Supports spinning down of connected disks as well as the box.

Easy installation of the hard disk as well as automatic installation can be handled even by a layman.

Features:
Fully compatible with USB 2.0 and backward compatible with USB 1.1.
Supports transmission rates 12 / 480 Mbit/s (full / high speed).
Supports 2.5" SATA III / II / I disks of max. 9.5 mm height of all capacities without limitation.
Compliant with Serial ATA 2.0 specification (SATA/300), transmission rates of up to 3 Gb/s (300 MB/s).
Compliant with Serial ATA 1.0 specification (SATA/150), transmission rates of up to 1.5 Gb/s (150 MB/s).
The total bandwidth / transmission rate of the box is determined by the USB 2.0 interface used (theor. 480 Mbit/s).
SSD/HDD boot support in external box.
Possibility to connect your device while running thanks to the Hot Plug support.
Full Plug and Play support.
HDD Auto Spindown support - possibility to set the interval for disk spindown when idle.
HDD Auto Stop support - the disk turns off after your PC spins down.
Connection via USB mini B female connector.
70 cm long USB 2.0 Y cable USB Type A male / USB mini B male is included.
Supplying the power via USB bus from one USB port is sufficient in most cases.
If necessary, the power supply can be boosted from the second USB port thanks to the Y cable included.
A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).
Very simple disk installation - the disk is connected directly into the SATA connector of the motherboard, and inserted into the box body; the front is fastened with two screws using a screwdriver that is included.
Compact dimensions 130 x 78 x 12.5 mm.
External box weight 77 g (without USB cable and disk).

Supported OSs:
MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.x and higher, Linux with kernel 2.6.x and above.
Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available.

Package contains:
USB 2.5" external box,
USB Y cable 70 cm long,
mounting screws and the screwdriver,
printed installation guide in English, Czech, Slovak and Polish,
packed in a cardboard box.