APC Performance SurgeArrest 8 Outlets w/ Phone / Coax Protection 230V Germany Black 8 AC outlet(s) 2.44 m

Maximum Protection and Convenience for Computers, Notebooks and Other Electronics3 Modes of protection (L-N : L-G : N-G)The remaining modes continue to provide protection in the event a mode of protection is compromised as a result of a surge.EMI and RFI noise filteringReduces line noise that can cause data loss and keyboard errors.Power Line Communications (PLC) compatibleProtects PLC network adapters without interrupting network communications.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Overload IndicatorIndicator illuminates when connected equipment draws more power than unit s capacity. To remedy the condition, unplug less vital equipment.180 degree Rotating Cord RetainerA 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.Dataline Surge ProtectionProvides protection of connected equipment from power surges on the data lines.Cord managementReduces cord clutter.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Lightning and Surge ProtectionTo prevent damage to your equipment from power surges and spikes.SurgeArrest Performance Features & BenefitsProtectionLightning and Surge ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.IEEE let-through rating and UL 1449 complianceThe 'Institute of Electrical and Electronics Engineers' (IEEE) Let-Through Voltage rating is based on a test that subjects a Surge Protector to a 6,000 volt spike. The rating equates to the amount of excess voltage that reaches connected equipment. The lower the number, the better the performance of the Surge Protector is. Underwriter's Laboratory's UL1449 surge protection safety standard uses these ratings to help users gauge performance. UL's best Transient Voltage Surge Suppressor (TVSS) Let-Through Voltage rating is "300V".Data-line ProtectionProtection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from back door surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.Noise FilteringAttenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.Phone Line SplitterAllows use of two pieces of equipment at once, such as a modem and phone.SafetyPlug Activated Safety ShuttersShutters protect users from accidental contact with unused outlets.Overload IndicatorIndicator illuminates when connected equipment draws more power than unit s capacity. To remedy the condition, unplug less vital equipment.Adjustable Cable ManagementKeeps cords and cables neat and organized.Catastrophic Event ProtectionSurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.Cord managementTo help organize power cords.Fail Safe ModeMost other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.Protection Working IndicatorSurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.Site wiring fault indicatorIn order to work properly, surge suppressors require a correctly wired and grounded outlet. APC surge protectors identify dangerous wiring problems before you plug in your equipment.ConvenienceTransformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.180 degree Rotating Cord RetainerA 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.

Power
Surge energy rating:	2500 J
AC outlets quantity:	8 AC outlet(s)
AC outlet types:	Type F
Nominal input voltage:	230 V
AC input frequency:	50 - 60 Hz
Nominal current output:	10 A
Peak current, normal mode:	37500 A
Peak current, common mode:	37500 A
Ports & interfaces
Cordless:
RJ-11 ports quantity:	1
Features
Product colour:	Black
EMI/RFI noise filtering:
EMI/RFI noise filtering:	70 dB
Response time:	0.000001 ms
Surge protection features:	A/V, Coax, Fax, Modem, Telephone
On/off switch:
Technical details
Sustainability certificates:	RoHS
Weight & dimensions
Cable length:	2.44 m
Weight:	1.23 kg
Width:	122 mm
Depth:	42 mm
Height:	372 mm
Operational conditions
Operating temperature (T-T):	0 - 40 °C
Storage temperature (T-T):	-40 - 85 °C
Operating relative humidity (H-H):	0 - 95%
Storage relative humidity (H-H):	0 - 95%
Operating altitude:	0 - 3000 m
Non-operating altitude:	0 - 15000 m
Certificates
Certification:	CE, REACH
Indication
LED indicators:
Packaging data
Package dimensions (WxDxH):	216 x 51 x 216 mm
Packaging content
Cables included:	Coaxial, Phone (RJ-11)
Other features
Cable (Coax) protection:
Telephone line protection:
Audio/video line protection:
Input connections:	Schuko CEE 7/7P
Logistics data
Harmonized System (HS) code:	85364900
Packaging net weight:	1.32 kg