High performanceBy creating a disk based on efficient memory in 3D NAND technology, we managed to achieve sequential transfer parameters of up to 2050 MB/s for reading and 1650 MB/s for write.New possibilities with NVMeNVM Express communication protocol was designed from the ground up to achieve the potential of fast flash based storage media. By utilizing it in PX500 gen.2 SSD, we were able to extract the maximum performance from its memory, controller and PCIe Gen 3 x4 interface. NVMe drastically reduces latency and queuing to bring much better responsiveness vs. AHCI-based SSD.Heat under controlOne of the problems that concerns M.2 SSD format is the thermal throttling limitation of efficiency due to too high ambient temperature. To get it under control, PX500 gen.2 have special coating consisting of copper and graphite. Thanks to this, we have obtained very good heat dissipation, without increasing the size of the disk.
| Features | |
| SSD form factor: | M.2 |
| SSD capacity: | 1000 GB |
| Interface: | PCI Express 3.0 |
| Memory type: | 3D NAND |
| NVMe: |  |
| Component for: | PC/notebook |
| Hardware encryption: |  |
| NVMe version: | 1.3 |
| Read speed: | 2050 MB/s |
| Write speed: | 1650 MB/s |
| M.2 key ID: | M |
| PCI Express interface data lanes: | x4 |
| Mean time between failures (MTBF): | 2000000 h |
| TBW rating: | 660 |
| Operational conditions | |
| Operating temperature (T-T): | 0 - 70 °C |
| Storage temperature (T-T): | -45 - 85 °C |
| Maximum operating temperature: | 70 °C |
| Weight & dimensions | |
| Width: | 22 mm |
| Depth: | 80 mm |
| Height: | 3.5 mm |
| Packaging data | |
| Package type: | Blister |
